LED strip quick connection, LRA0012, power cable connector with cable, 2 contacts
Reference : 01-006930
LED strip quick connection, LRA0012, power cable connector with cable, 2 contacts, 10mm strip, 24V DC, 4A, strip IP20
By demand
Data sheet
Strip max width - (mm) | 10 |
Number of contatcs | 2 |
Suitable for LED strip | Mono, DTW |
Power factor correction - (PFC) | 2 |
D4i | 4 |
ZigBee | 20 |
Konnex, (KNX) | 12 |
0-10V | toitekaabel |
1-10V | juhtmega |
Infrared (IR) | 2,5/5,5 |
Long Range, (LoRa) | 24 |
Z-Wave | 4 |
Sonoff | 12 |
DMX512 | 30 |
Remote Device Management (RDM) | 20 |
Near Field Communication (NFC) | white/black |
Google Assistant | 2,5/5,5 |
Amazon Alexa | 12 |
Mobile app | red/black |
Max voltage - (V DC) | 24 |
Strip architecture - (CC/CV) | SMD |
Distance between contacts - (mm) | 5 |
Brightness - very warm white - (lm) | 0,33 |
Brightness - warm white - (lm/m) | 22 |
Brightness - nature white - (lm/m) | power cable connector |
Brightness - cold white - (lm/m) | with cable |
Brightness - yellow - (lm/m) | plastic |
Brightness - pink - (lm/m) | 2 |
Color - orange - (°K) | 5 |
Brightness - orange - (lm/m) | Mono, DTW |
Brightness - red - (lm/m) | 2 |
Brightness - green - (lm/m) | 5 |
Width - (mm) | 14 mm |
Width - (cm) | 15 |
Height - (mm) | 5 mm |
Height - (cm) | 5 |
Type | SMD |
Diameter - (mm) | 12 |
Weight - (g/pc) | 30 |
Weight - (kg/pc) | 15 |
Body color | valge/must |
Cable length - (cm) | 14 cm |
Cable color | punane/must |
Wire corss-section - (mm²) | 0,33 |
Wire corss-section - (AWG) | 22 |
Materials | plastik |
Warranty - (y) | 2 years |
More info
For a better connection, you can use soldering to connect the strips, but this is not possible every time. Then it's good to use the fast connection. NB! There are a few things to watch out for with hardwired quick connections. Since the quick connection can be installed on both ends of the strip, it may happen that the colors of the wires are not correct. In this case, you just have to follow the designation on the strip and change the meaning of the wire colors accordingly. It should also be taken into account that due to the construction of the strips, different manufacturers have different order of terminals even for multi-colored strips, and this again creates a situation where the color of the wire and the marking on the strip may not match.