LED strip connection, LRA0032, continue, strip to strip with cable, 2 contacts
Reference :
LED strip connection, LRA0032, continue strip to strip with cable, 2 contacts, 5mm strip, 24V DC, 3,5A, IP20
By demand
Data sheet
Strip max width - (mm) | 5 |
Number of contatcs | 2 |
Suitable for LED strip | Mono, DTW |
Power factor correction - (PFC) | 2 |
D4i | 3,5 |
ZigBee | 20 |
Konnex, (KNX) | 15 |
0-10V | jätkamine |
1-10V | juhtmega |
Resistance | 15,6 |
Long Range, (LoRa) | 24 |
Z-Wave | 3,5 |
Near Field Communication (NFC) | transparent |
Amazon Alexa | 15 |
Mobile app | white/white |
Max voltage - (V DC) | 24 |
Strip architecture - (CC/CV) | COB |
Brightness - very warm white - (lm) | 0,52 |
Brightness - warm white - (lm/m) | 20 |
Brightness - nature white - (lm/m) | continue |
Brightness - cold white - (lm/m) | with cable |
Brightness - yellow - (lm/m) | PC, copper |
Brightness - pink - (lm/m) | 2 |
Color - orange - (°K) | 3,3 |
Brightness - orange - (lm/m) | Mono, DTW |
Brightness - red - (lm/m) | 2 |
Width - (cm) | 6,6 |
Length - (cm) | 15,6 |
Height - (cm) | 3,3 |
Type | COB |
Weight - (kg/pc) | 6,6 |
Strip IP | 20 |
Body color | läbipaistev |
Cable color | valge/valge |
Wire corss-section - (mm²) | 0,52 |
Wire corss-section - (AWG) | 20 |
Materials | PC, vask |
More info
For a better connection, you can use soldering to connect the strips, but this is not possible every time. Then it's good to use the fast connection. NB! There are a few things to watch out for with hardwired connections. Since the connection can be installed on both ends of the strip, it may happen that the colors of the wires are not correct. In this case, you just have to follow the designation on the strip and change the meaning of the wire colors accordingly. It should also be taken into account that due to the construction of the strips, different manufacturers have different order of terminals even for multi-colored strips, and this again creates a situation where the color of the wire and the marking on the strip may not match.