LED strip connection, LRA0027, continue, strip to strip "I", 2 contacts
Reference :
LED strip connection, LRA0027, continue strip to strip "I", 2 contacts, 8mm strip, 24V DC, 5A, IP20
By demand
Data sheet
Number of contatcs | 2 |
Suitable for LED strip | Mono, DTW |
Power factor correction - (PFC) | 2 |
D4i | 5 |
ZigBee | 20 |
0-10V | jätkamine |
1-10V | I |
Resistance | 21,6 |
Long Range, (LoRa) | 24 |
Z-Wave | 5 |
Near Field Communication (NFC) | transparent/white |
Max voltage - (V DC) | 24 |
Strip architecture - (CC/CV) | SMD |
Distance between contacts - (mm) | 3,6 |
Brightness - nature white - (lm/m) | continue |
Brightness - cold white - (lm/m) | I |
Brightness - yellow - (lm/m) | PC, copper |
Brightness - pink - (lm/m) | 2 |
Color - orange - (°K) | 4,3 |
Brightness - orange - (lm/m) | Mono, DTW |
Brightness - red - (lm/m) | 2 |
Brightness - green - (lm/m) | 3,6 |
Width - (cm) | 9,5 |
Length - (cm) | 21,6 |
Height - (cm) | 4,3 |
Type | SMD |
Weight - (kg/pc) | 9,5 |
Strip IP | 20 |
Body color | läbipaistev/valge |
Materials | PC, vask |
More info
For a better connection, you can use soldering to connect the strips, but this is not possible every time. Then it's good to use the fast connection. NB! There are a few things to watch out for with hardwired connections. Since the connection can be installed on both ends of the strip, it may happen that the colors of the wires are not correct. In this case, you just have to follow the designation on the strip and change the meaning of the wire colors accordingly. It should also be taken into account that due to the construction of the strips, different manufacturers have different order of terminals even for multi-colored strips, and this again creates a situation where the color of the wire and the marking on the strip may not match.