Signal...
Signal amplifier for LED strip, RGB, 12-24V DC,...
14,03 €
Quantity:
Total:
Total products:
Total shipping: To be determined
Total:
Reference : 01-006923
LED strip quick connection, LRA0005, power cable connector with cable, 4 contacts, 10mm strip, 24V DC, 4A, strip IP20
0 Item Items By demand Warning: Last items in stock!
Availability date:
Strip max width - (mm) | 10 |
Number of contatcs | 4 |
Suitable for LED strip | RGB |
Power factor correction - (PFC) | 2 |
D4i | 4 |
ZigBee | 20 |
Konnex, (KNX) | 19 |
0-10V | toitekaabel |
1-10V | juhtmega |
Long Range, (LoRa) | 24 |
Z-Wave | 4 |
DMX512 | 10 |
Remote Device Management (RDM) | 20 |
Amazon Alexa | 19 |
Mobile app | blue/red/green/black |
Max voltage - (V DC) | 24 |
Strip architecture - (CC/CV) | SMD |
Brightness - very warm white - (lm) | 0,52 |
Brightness - warm white - (lm/m) | 20 |
Brightness - nature white - (lm/m) | power cable connector |
Brightness - cold white - (lm/m) | with cable |
Brightness - yellow - (lm/m) | plastic |
Brightness - pink - (lm/m) | 4 |
Color - orange - (°K) | 3 |
Brightness - orange - (lm/m) | RGB |
Brightness - red - (lm/m) | 2 |
Width - (mm) | 16 mm |
Width - (cm) | 16 |
Height - (mm) | 3 mm |
Height - (cm) | 3 |
Type | SMD |
Weight - (g/pc) | 10 |
Weight - (kg/pc) | 16 |
Cable length - (cm) | 14 cm |
Cable color | sinine/punane/roheline/must |
Wire corss-section - (mm²) | 0,52 |
Wire corss-section - (AWG) | 20 |
Materials | plastik |
Warranty - (y) | 2 years |
For a better connection, you can use soldering to connect the strips, but this is not possible every time. Then it's good to use the fast connection. For this connection, it is important that the moving part of the mounting clip is on the side of the strip where there are no contacts. When connecting the other way around, there is no contact. NB! There are a few things to watch out for with hardwired quick connections. Since the quick connection can be installed on both ends of the strip, it may happen that the colors of the wires are not correct. In this case, you just have to follow the designation on the strip and change the meaning of the wire colors accordingly. It should also be taken into account that due to the construction of the strips, different manufacturers have different order of terminals even for multi-colored strips, and this again creates a situation where the color of the wire and the marking on the strip may not match.
1,89 €
0,75 €
1,07 €
0,90 €
1,07 €
0,83 €
1,16 €
0,83 €
1,22 €
0,97 €
1,28 €
0,90 €
1,53 €
0,97 €
1,28 €
1,22 €
1,83 €
1,53 €
0,97 €
1,25 €
0,97 €
1,25 €
0,97 €
1,68 €
1,04 €
1,25 €
1,04 €
1,83 €
0,98 €
1,34 €
Signal amplifier for LED strip, RGB, 12-24V DC,...
14,03 €
RGB LED strip, SMD5050, 20 watt meter
16,79 €
Dimmer, knob, 12-24V, 3×3A, price from 9.00 €/pc
10,52 €
RGB LED strip, SMD2835, 8.5 watt meter
7,66 €
LED strip quick connection, LRA0006, continue...
0,55 €